<% else %> <% end if %>
Home
Our Company
Scope Of Capabilities
Our Experiences
Testimonial
Picture Gallery
 
 
   
   
 
   
   
 

Scope of Accreditation


 
Materials Tested TP No. Type of Tests  Standard Test Methods
Hardened Concrete  TP 01 - Compressive Strength Concrete Core (0-500 kN) - BS EN 12504-1 : 2009
- MS 26 : Part 2 : 1991
TP 02(a) - Compressive Strength Concrete Cube (0-5000 kN) - BS EN 12390-3 : 2009
    - MS 26 : Part 2 : 1991 Section 3.0
TP 02(b) - Compressive Strength Concrete Cylinder (0-5000 kN) - BS EN 12390-3 : 2009
TP 03 - RHT ( 20-55 Rebound Number, N ) - BS EN 12504-2 : 2001
TP 05 - WPT ( 0-2.500 inches ) - ASTM C 803 / C 803 M - 03
TP 06 - Determination of Density - BS EN 12390-7 : 2009
TP 67 - Det. of Density, Absorption & Voids - ASTM C 642-13
TP 34 - ISAT - BS 1881 : Part 208 : 1996
TP 35 - RCPT - AASHTO Designation : T 277 - 07
- ASTM C 1202 - 12
TP 36 - W/Permeability Test ( Con. Cube ) - DIN 1048 : Part 5 : Jun 1991
TP 37 - W/Absorption ( Con. Specimens ) - BS 1881 : Part 122 : 2011
TP 39 - S/Mod of Elast. in Compression - BS 1881 : Part 121 : 1983
    - BS ISO 1920-10
TP 40 - Flexural Strength Test - BS EN 12390-5 : 2009
TP 28 - Changes in Length on Drying and Wetting - MS 30 : Part 16 : 1995
  - BS 1881 : Part 5 : 1970 : Amd 1990 Clause 5.0
  TP 90 - Tensile Splitting Strength of Concrete  - BS EN 12390-6 : 2009
  TP 92 - Depth of Penetration of Water Under Pressure - BS EN 12390-8 : 2009
Fresh Concrete TP 81 - Air Content (Pressure Method) - BS EN 12350-7 : 2009
  TP 82 - Bleeding Concrete - ASTM C232/C232M-12, Method A
  TP 83 - Setting Time by Penetration Resistance - ASTM C403/C403M-08
Metallic Concrete Fiber TP 86 - Flexural Tensile Strength (LOP), Residual BS EN 14651 : 2005 (Amd. 2007)
TP 87(a) - Flexural Strength & Residual Strength EFNARC : 1996, Clause 10.3
TP 87(b) - Energy Absorption Capacity  EFNARC : 1996, Clause 10.4
  TP 88 - Flexural Strength & Flexural Toughness JSCE-SF4 : 1984
  TP 89 - Flexural Performance of Fiber Reinforced Concrete ASTM C 1609-10
  TP 91(a) - Flexural Strength & Residual Strength BS EN 14488-3 : 2006
  TP 91(b) - Energy Absorption Capacity  BS EN 14488-5 : 2006
Resin Based Mortars TP 07 - Resin Cube ( 0-2000 kN ) - BS 6319 : Part 2 : 1983 Excluding Clause 5.1 & 5.2
    - ASTM C 109/C109M-13, Clause 10.6
TP 76 - Mortar Cube ( 0-3000 kN ) - MS 522 : Part 2 : 2005 Clause 7.10 and Clause 7.11
Bricks and Blocks TP 65 - Compressive Strength  - MS 76 : 1972 : Clause 39
TP 66 - Water Absorption (Boiling Method) - MS 76 : 1972 : Clause 40
TP 73 - Comp Strength of Masonry Units - BS EN 772-1 : 2000 Part 1 Clause 8.0
Portland Cement  TP 69 - Autoclave Expansion of Hydraulic Cement - ASTM C 151-05 / C 151M-09
Aggregates TP 11 - SG & WA ( Fine & C/Agg. ) - BS 812 : Part 2 : 1995 : Clause 5
  - MS 30 : 1971 : Section 4
    - BS EN 1097-6 : 2013
  TP 12(a) - SA ( Fine and Coarse Agg ) - BS EN 933-1 : 2012  
  - MS 30 : Part 4 : 1995
  TP 13 - Clay, Silt  & Dust ( Fine @ C/ Agg ) - BS 812 : Part 1 : 1975 : Clause 7.2.4 (Decantation Method)
  - MS 30 : 1971, Section 3, Method B (Decantation Method)
    - ASTM C117-04
  TP 14 - Acid-soluble - Organic Impurities ( F/Agg )  - MS 30 : Part 15 : 1995 
  TP 15 - Organic Impurities ( F/Agg ) - ASTM C40/C40M - 11 
  TP 16 Soundness Test (Using NaSO4 @ MgSO4) - ASTM C 88 - 05
    - AASHTO Designation : T 104 - 99 (2003)
  TP 17 - pH Value ( Electrometric Method ) - BS 1377 : Part 3 : 1990 Clause 9
  TP 18(a) - Flakiness Index ( Coarse Aggregates ) - BS 812 : Part 105-1 : 1989
  - MS 30 : Part 5 : 1995 : Section 1
  TP 18(b) - Particle Shape Fakiness Index - BS EN 933-3 : 2012
  TP 19(a) - Elongation Index ( Coarse Aggregate ) - BS 812 : Part 105-2 : 1990
  - MS 30 : Part 5 : 1995 : Section 2
  TP 19(b) - Particle Shape Index - BS EN 933-4 : 2008
  TP 20 - ACV - BS 812 : Part 110 : 1990
  - MS 30 : Part 8 : 1995 
  TP 21 - TPF Value - BS 812 : Part 111 : 1990
  - MS 30 : Part 9 : 1995 
  TP 22 - LA ( Small Size coarse Aggregates ) - ASTM C131/C131M-14
  - MS 30 : Part 11 : 1995 : Section 1
  - LA ( Large size Coarse Aggregate ) - ASTM C 535-09
    - LA ( Resistance to Fragmentation ) - BS EN 1097-2 : 2010 Clause 5.0
  TP 27 - Impact Value Test ( AIV ) - BS 812 : Part 112 : 1990
  - MS 30 : Part 10 : 1995
  TP 31 - Shell Content Test ( C/Agg.) - BS 812 : Part 106 : 1985
  - MS 30 : Part 6 : 1995
      - BS EN 933-7 : 1998
  TP 33 - Sand Equivalent Test - ASTM D 2419 - 09
      - BS EN 933-8 : 2012 : Part 8
  TP 50 - Lightweight Particle of Aggregate - ASTM C123/C123M-12
  TP 51(a) - Loose Bulk Density and Voids - BS EN 1097-3 : 1998
  TP 51(b) - Bulk Density, Voids and Bulking - BS 812 : Part 2 : 1995, Clause 6
  TP 52 - Methylene Blue Test                                                                                                                           - BS EN 933-9 : 2009 + A1 : 2013
  TP 60 - Polished Stone Value  - BS EN 1097-8 : 2009
  TP 68 - Pot. Alkali Reactiviy (M/Bar Method) - ASTM C 1260 - 14
  TP 80 - Clay Lumps & Friable Particles in Agg - ASTM C142/C142M - 10
Filling Material  TP 24 - CTVH  - BS 1377 : Part 4 : 1990 Clause 3.7
TP 42 - CTRM  - BS 1377, Part 4 : 1990 : Clause 3.3 to Clause 3.6
TP 30 - Moisture Content - BS 1377 : Part 2 : 1990 : Clause 3.2
TP 29 - Liquid Limit ( Cone Penetrometer ) - BS 1377 : Part 2 : 1990 : Clause 4.3
- Liquid Limit (Casagrande) - BS 1377 : Part 2 : 1990 : Clause 4.5
- Plastic Limit and Plasticity Index - BS 1377 : Part 2 : 1990 : Clause 5.0
TP 43 - Soaked CBR Test ( LCBR ) - BS 1377 : Part 4 : 1990 : Clause 7.0
TP 44 - In-Situ CBR Test ( CBR ) - BS 1377 : Part 9 : 1990 : Clause 4.3
TP 45 - Field Density Test ( FDT ) - BS 1377 : Part 9 : 1990, Clause 2.1 and 2.2
- ASTM D 1556 - 07
TP 12(b) - Particle size distribution for soils - BS 1377 : Part 2 : 1990 Clause 9.2 and Clause 9.3
TP 71 - Soil Density  - BS 1377 : Part 2 : 1990 Clause 7.0
  TP 72 - JKR Probe (60 Cone) - In - House Method (JKR Specification)
Metallic Material (Reinforcing Bar, Wire rods & Wire) TP 08 - Tensile Test ( 0 - 2000 kN ) - BS EN 10002 - 1 : 2001 
- ISO 6892-1 : 2009 Excluding Site Sampling
    - ASTM A 370-14, Appendix A9
    - BS EN ISO 15630-2 : 2010
      - ISO 15630-2 : 2010
Metallic Materials TP 09(b) - Bend Test - ISO 7438 : 2005
Hot Roll S/Bars  TP 09(a) - Bend & Rebend Test ( 0-550 kN ) - MS 146 : 2006 : Clause 16.2 & 16.3 Exc. Site Sampling 
BRC TP 10(a) - Tensile, Rebend & Weld  - MS 145 : 2006 : Annex A Excluding Site Sampling
      - BS EN ISO 15630-2 : 2010
      - ISO 15630-2 : 2010
Mild Steel Wire  TP 10(b) - Tensile Test & Rebend Test - MS 144 : 2006 : Clause 14
PC strand TP 77 - Tensile Test & Elongation Test - ASTM A 370-13, Annex A7
    - BS 5896 : 1980 Appendix A5
    - ASTM A 1061/A 1061M-09
Steel (Coupler)  TP 78 - Tensile Test  - ISO 6892-1 : 2009 Excluding Site Sampling
Specification refer to BS 8110 : Part 1 : 1997 (Amd. 1998) Clause 3.12.8.16.2 : Bar in Tension
Threaded Fastener TP 84 - Cone Proof Load - ASTM F 606-11a, Clause 4.3
    - ASTM F 606M-12, Clause 4.3
  TP 85(a) - Proof Load Test for Finished Bolt, Screw & Studs - ISO 898-1 : 2009, Clause 9.6
  TP 85(b) - Proof Load Test for Nut - ISO 898-2 : 2012, Clause 9.1
  TP 93(a) - Tensile Test Under Wedge Loading of Bolts & Screws - BS EN ISO 898-1 : 2013, Clause 9.1 
      - ISO 898-1 : 2013, Clause 9.1
  TP 93(b) - Tensile Test for Finished Bolts, Screws & Studs - BS EN ISO 898-1 : 2013, Clause 9.2 & 9.3
      - ISO 898-1 : 2013, Clause 9.2 & 9.3
Rock TP 94 - Point Load Strength Index - ASTM D 5731-08
Rubber & Plastic TP 53 - Tensile and Elongation Test - ASTM D 412-06ae2, Method A
Geotextile TP 95 - Index Puncture Resistance of Geomembranes - ASTM D 4833-07
  TP 96 - Tensile Properties of Geotextiles by Wide-width Strip - ASTM D 4595-11
  TP 97 - Trapezoid Tearing Strength of Geotextiles - ASTM D 4533-11
  TP 98 - Grab Breaking Load and Elongation of Geotextiles - ASTM D 4632-08
Bitumen TP 23 - Bitumen (Centrifuge Extraction) - ASTM D 2172 - 05
  TP 59 - Thickness ( Bitumen) - ASTM D 3549/D3549M - 11
  TP 74 - Marshall Stability & Flow of Bituminous Mixtures - ASTM D 6927 - 06
  TP 75 - Bulk SG & Density of Comp.Bituminous Mixtures - ASTM D 2726 - 09
Ceramic Tiles  TP 54 - W/A, A/P, AR/Den. & B/Den.  - MS ISO 10545-3 : 2001 (Reapproved 2010)
TP 55 - MOR & Breaking Strength Test - MS ISO 10545-4 : 2003
TP 56 - Chemical Resistance Test - MS ISO 10545-13 : 2001
TP 57 - Resistance to Stains Test - MS ISO 10545-14 : 2001
Vitreous China Sanitary  Appliances  TP 46 - Water Absorption Test  - MS 147 : 2001 : Appendix A
TP 48 - Chemical Resistance Test - MS 147 : 2001 : Appendix C
TP 49 - Resistance to Staining Test  - MS 147 : 2001 : Appendix D
Security Seals TP 61 - Tensile Test  - ISO / PAS 17712 : 2006 (E) (Exclude Clause 6.5 - Impact Test)
TP 62 - Shear Test
TP 63 - Bending Test
Ground Anchorages TP 70 - Pull Out Load & Displacement Measurement - BS 8081 : 1989, Clause 11.2.4, 11.2.5, 11.2.7



 

   
   
   
   
   
 
 
Copyright©2002
Testech Sdn. Bhd. All rights reserved
Hosted by InVision DotCom